COVERED HAZARDS

IMPACT CUSHIONING

Energy absorption in the heel area.
Designed to endure impact of above 20 J in the heel area.

WATER RESISTANCE

Designed to keep water from entering the shoe when walking across puddled areas (up to 1 inch high).

SLIP RESISTANCE (SR)

Footwear with slip-resistant outsole,
meets ASTM 3445-21 testing standard

HEAT INSULATION

Insulates the shoe from the heat of the floor. It is designed to prevent the temperature from rising above 71.6ºF when the shoe is on a surface at 302ºF for 30 minutes.

COLD INSULATION

Insulates the shoe from the cold of the floor. It is designed to prevent the temperature from dropping below 50ºF when the shoe is on a surface at 1.4ºF for 30 minutes.

STATIC DISSIPATIVE (SD)

Static dissipative footwear outsole meets ASTM 2413-18 testing standard of 1-35 megohms. The footwear helps to prevent the build-up of static electricity on uninsulated surfaces.

ELECTRICAL HAZARD

The electrical hazard resistant footwear outsole provides a supplemental form of protection to the wearer from hazardous step potential (the difference in electrical potential between the feet) while standing on the ground. Meets ASTM 2413-18 standards.

PUNCTURE RESISTANT

The anti-perforation textile insole is designed to reduce the risk of puncture wounds to the bottom of the feet. Meets ASTM 2413-18 standards, withstanding a puncture force of 270 lbf and 1,500,00 flex cycles without signs of deterioration.

IMPACT AND COMPRESSION RESISTANCE (TOE AREA)

Toe cap protects against impact and
compression hazards and meets ASTM 2413-18 standards.